To Place a Cone Feature with Axis Set to Points

Select the Cone Feature tool.
From the Axis option menu, choose Points.
Enter a data point to define the center of the base.
(Optional) If Base Radius is off, enter a data point to define the base radius.
Enter a data point to define height.
If Height is off, this data point defines the cone's height and orientation.

If Height is on, this data point defines only the cone's orientation.
(Optional) If Top Radius is off, enter a data point to define the top radius.

Placing a parametric cone in an Isometric view, with all dimensions off and AccuDraw set to Top orientation. | Left: Define the center of the base (1) and the radius (2). | Center: Define the height (3). | Right: Define the top radius.